The schematic

Connect every part: the LED driver and its LEDs, the USB-C connector, the resistors and the capacitors. Then run the electrical rules check until it is clean.

3.1

Schematic design and the electrical rules check

KiCadmembersWe copy the datasheet's application circuit: driver, four LEDs, the USB-C connector with its CC resistors, the RSET resistor, decoupling capacitors, net labels and power flags. Then ERC to zero errors.

The steps are in the full course

This page shows what the lesson covers. Members get every step with screenshots, the exact values to type, the checks, the fixes and the project files.

Get the full course Log in or start free with chapters 1 and 2