Gerber files, drill files, placement file and BOM
The board is finished, so now we export everything a factory needs to make it. Gerber files describe each layer, the drill files say where the holes go, the placement file tells the assembly machine where each part sits, and the BOM (bill of materials) lists which exact parts to buy.
The big picture
- Datasheets
- Symbols & footprints
- Schematic
- PCB layout
- Files & order
The design is finished; now we turn it into files a factory understands. The Gerbers make the bare board, the drill files make the holes, and the placement file and the BOM tell the assembly line which part to solder where.
Datasheets
- CAT4104VP2-GT3 (onsemi), LED driver · TDFN-8; the datasheet link is on the product page
- 158301265A (Würth Elektronik), white LED 1206 · datasheet and 3D model on the product page
- 10164359-00011LF (Amphenol), USB-C power connector · drawing, pin table and 3D model on the product page
- ERJ-3EKF2101V (Panasonic), 2.1 kΩ 0603
- RC0603FR-075K1L (YAGEO), 5.1 kΩ 0603
- CL10B105KA8NNNC (Samsung), 1 µF 25 V X7R 0603
The steps are in the full course
This page shows what the lesson covers. Members get every step with screenshots, the exact values to type, the checks, the fixes and the project files.