KiCad PCB Design· Live
Home / Chapter 4 / 4.2

Routing, copper zones, vias and the board outline

Lesson 4.2 · KiCad · members

Now the copper. Thin tracks for signals, wide tracks where the LED current flows, and copper zones for 5 V and ground.

The big picture
  1. Datasheets
  2. Symbols & footprints
  3. Schematic
  4. PCB layout
  5. Files & order

The parts are placed; now we connect them with copper. Thin tracks for signals, wide tracks where the LED current flows, and copper zones for 5 V and ground. Then the board outline tells the factory where to cut the board.

The steps are in the full course

This page shows what the lesson covers. Members get every step with screenshots, the exact values to type, the checks, the fixes and the project files.